Search Results for "Pipe"

Get rid of leaks with 1.33 oz. tube of Leak Lock? from Highside Chemicals. It is is a state-of-the-art high strength, PIPE joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers, and solvents that is useable on all clean metal or plastic surfaces. The soft-s

Get rid of leaks with this brush-top plastic jar of Leak Lock? from Highside Chemicals. It is a state-of-the-art high strength, PIPE joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers, and solvents that is useable on all clean metal or plastic surfaces.

Get rid of leaks with this brush-top plastic jar of Leak Lock? from Highside Chemicals. It is a state-of-the-art high strength, PIPE joint sealant consisting of chemically resistant film formers, plasticizers, reinforcing fillers, and solvents that is useable on all clean metal or plastic surfaces.

Lambro's vent hood allows for maximum exhaust airflow when venting a clothes dryer or bathroom fan. The built in damper prevents back drafts while the removable guard prevents critters from entering the home through the vent. This vent can be used in other 4 in. exhaust venting applications.

The Winegard DS-3000 J-PIPE Antenna Mount is ideally designed for outdoor antennas such as on the side of a house or roof. The mount foot can be used on either end of PIPE for excellent mounting. The DS-3000 is built with PIPE galvanized steel, 38 in. long, has a wall thickness 0.06 in., 1.66 in. OD

BrassCraft?s AU1-8S 1/2 in. OD Flare x 1/2 in. FIP steel female gas fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut

BrassCraft?s AU2-8S 1/2-In. OD Flare x 1/2-In. MIP (3/8-In. FIP) Steel Male Gas Fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas c

BrassCraft?s AU1-6-8S 3/8-In. OD Flare x 1/2-In. FIP Steel Gas Fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The

BrassCraft?s AU2-6-8S 3/8-In. OD Flare x 1/2-In. MIP (3/8-In. FIP) Steel Male Gas Fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas

BrassCraft?s MAU1-10-8S 5/8-In. OD Flare (15/16-16 Thread) x 1/2-In. FIP Steel Female Gas Fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects to

BrassCraft?s MAU1-10-12S 5/8-In. OD Flare (15/16-16 Thread) x 3/4-In. FIP Steel Female Gas Fitting connects a gas connector to an appliance gas inlet or gas supply PIPE or gas ball valve. This fitting is manufactured from steel for a seamless, durable design. The flared end of the fitting connects t

Keep the dryer operating at peak performance with a 4 in. Galvanized Vent Hood from Deflecto. The wide-mouth hood includes a PIPE and collar, and it's recommended by dryer manufacturers.

The Supurr-Flex Dryer Vent Kit, 8 ft., from Deflecto has everything you need to get your appliance connected. The SK8WF includes a Supurr-Vent Louvered Vent Hood with PIPE and collar, semi-rigid aluminum duct and two 4 in. metal worm clamps.

Make solid connections with this Rigid Aluminum PIPE from Deflecto?. The round PIPE measures 4 in. x 24 in. It has a snaplock seam to close the PIPE. It is ideal for general-purpose venting, dryer venting, and bath fan venting.

Looking for an under eave vent? Lambro's 4-In. White Plastic Under Eave Vent with Weather Damper and Tail PIPE can be used for the dryer, bathroom fan, and other general venting applications. The opening/closing damper prevents outside elements from entering the vent.

This 48-in. long Dormont? Gas Dryer and Water Heater Flex-Line is made of durable, corrosion-resistant 304 stainless steel. It is configured with PIPE threaded fittings for installation and has been leak-tested. Designed with safety in mind, this CSA?-approved gas connector exceeds all agency standa

The Supurr Guard Louvered Vent Hood from Deflecto is a 4 in. white hood, PIPE and collar that comes assembled. It includes a removable built-in bird and rodent guard for easy cleaning with tools. The vent hood also includes a lifetime guarantee.

The 4 In. x 2 Ft. Builder's Best Semi Rigid Push Fit Duct is designed for short distance dryer venting connections. Collars can attached for easy connection to dryer and wall PIPE. It is a class 0 aluminum duct that is fire resistant.

Builder's Best is a nationwide, high-performance manufacturer of quality venting solutions, designed to meet specific constraints of areas such as dryer venting, bathroom fan venting, fresh-air ventilation and general venting. The 4 in. x 8 ft. UL Transition-Duct Single-Elbow Kit contains PIPE, el

BrassCraft?s MAU2-10-8S 5/8-In. OD Flare (15/16-16 Thread) x 1/2-In. MIP (3/8-In. FIP) Steel Gas Fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet, or to the gas supply PIPE. This fitting is manufactured from solid bar stock for a seamless, durable design. The flared e

BrassCraft?s MAU2-10-12S 5/8-In. OD Flare (15/16-16 Thread) x 3/4-In. MIP (1/2-In. FIP) Steel Gas Fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet, or to the gas supply PIPE. This fitting is manufactured from solid bar stock for a seamless, durable design. The flared

Save headaches and plumber?s bills. Replace your kitchen sink drainer with this Mesh Strainer from Better Houseware to catch discards and keep your PIPEs clean and unclogged. No muss, no fuss, and even better, no clogged drains.

This Dormont 10C Series 48-In. Gas Logs/Space Heater Flex-Line has a 3/8 in. OD (Outer Diameter) and a 1/4 in. ID (Inner Diameter). It is a durable, corrosion-resistant stainless steel gas connector configured with 1/2 in. MIP (Male Iron PIPE) x 1/2 in. FIP (Female Iron PIPE) adapters and is 4 ft. l

Connect your moderate-demand gas appliance such as a 4-burner gas range, cooktop, dryer or water heater with this 3 ft. Gas Flex-Line (1/2 in. OD, 3/8 in. ID, 1/2 in. MIP x 1/2 in. MIP) from Dormont. The line is SafetyShield yellow coated. This helps protect the stainless steel connector from corros

This Dormont 20C Series 48-In. Gas Range/Furnace Flex-Line has a 1/2 in. OD (Outer Diameter) and a 3/8 in. ID (Inner Diameter). It is a durable, corrosion-resistant stainless steel gas connector configured with 1/2 in. MIP (Male Iron PIPE) x 1/2 in. MIP adapters and is 4 ft. long. Designed with safe

This Dormont 20C Series 60-In. Gas Range/Furnace Flex-Line has a 1/2 in. OD (Outer Diameter) and a 3/8 in. ID (Inner Diameter). It is a durable, corrosion-resistant stainless steel gas connector configured with 1/2 in. MIP (Male Iron PIPE) x 1/2 in. FIP (Female Iron PIPE) adapters and is 5 ft. long.

This Dormont 30C Series 48-In. Gas Range/Furnace Flex-Line with 5/8 in. OD and 1/2 in. ID is a durable, corrosion-resistant stainless steel gas connector. It is configured with 1/2 in. MIP x 1/2 in. MIP adapters and is 4 ft. long. Designed with safety in mind, this CSA-approved gas connector is yell

This Dormont 30C Series 72-In. Gas Range/Furnace Flex-Line has a 5/8 in. OD (Outer Diameter) and a 1/2 in. ID (Inner Diameter). It is a durable, corrosion-resistant stainless steel gas connector configured with 1/2 in. MIP (Male Iron PIPE) x 1/2 in. MIP adapters and is 6 ft. long. Designed with safe

This Dormont 30C Series 36-In. Gas Range/Furnace Flex-Line has a 5/8-in. OD (Outer Diameter) and a 1/2-in. ID (Inner Diameter). It is a durable, corrosion-resistant stainless steel gas connector configured with 1/2-in. MIP (Male Iron PIPE) x 3/4-in. MIP adapters and is 3-ft. long. Designed with safe

This Dormont 30C Series 48-In. Gas Range/Furnace Flex-Line with 5/8 in. OD and 1/2 in. ID is a durable, corrosion-resistant stainless steel gas connector. It is configured with 1/2 in. MIP x 3/4 in. MIP adapters and is 4-ft. long. Designed with safety in mind, this CSA-approved gas connector is yell

Connect your gas range, furnace, or boiler with this 5 ft. Gas Range and Gas Furnace Flex-Line (5/8 in. OD, 1/2 in. ID, 3/4 in. MIP x 1/2 in. MIP) from Dormont. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used for indoor

This Dormont 30C Series 48-Inch Gas Range/Furnace Flex-Line with 5/8 in. OD and 1/2 in. ID is a durable, corrosion-resistant stainless steel gas connector. It is configured with 1/2 in. MIP x 3/4 in. FIP adapters and is 4 ft. long. Designed with safety in mind, this CSA-approved gas connector is yel

The Lambro? 4-In. Aluminum Splice Connector is ideal for effectively connecting together v2 sections of flexible foil, flexible insulated duct, or rigid PIPE. The connector is crimped on both ends with a center bead to securely fasten the sections of duct to. The connector is constructed of 28-gauge

The Genesis GHG350 Mini Heat Gun is ideal for your next craft or DIY project. It can perform many tasks including shrink-wrap tubing for electrical projects, removing decals, stripping paint, activating adhesives, thawing frozen locks or PIPEs, and more! With a maximum temperature output of 662?F at

The Genesis? Dual-Temperature Heat Gun is extraordinarily versatile. Use it for stripping paint and varnish, softening caulking and putty for removal, removing adhesive labels, thawing PIPEs, gutters, freezers, or radiators. Use it also to loosen rusted nuts and bolts, speed-dry epoxy, cement, or an

This NMO Mount to UHF-Female Connector Ground Plane Kit will convert your NMO mobile antenna into a ground base station. It comes with 20-1/2 in. ground plane radials. It has a 200 watt power rating and a 100 MPH wind load. It is easy to install on any 2 in. pole or PIPE.